E Water Mission India Private Limite

Application Field
It is mainly used for waste water treatment for textile, printing, dyeing, paper making, mining, ink, butcher, landfill leachate and so on.
It can be used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
It also can be used in the production process of paper & pulp as retention agent.
Advantage
Stronger decolorization (
Faster sedimentations, better occulation.
Non-pollution (no aluminum, chloride, heavy metal ions, etc).
Application Procedure
The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-foated to become clear water.
The pH value of the waste water should be adjusted to 6-10 for better result.
Package and Storage: It is harmless, non-infammable, non-explosive, it cannot be placed in the sun.This product will appear layer after a long-term storage, but the effect will not be affected with stir.

• CPX is a type of clay mineral primarily composed of montmorillonite
• CPX has a high surface area and a strong ability to absorb and retain water. 

• Remove heavy metal from waste water such as: Desulfurization wastewater from Coal-fired power plant (wet desulfurization process) Waste water from printed circuit board plating (plated copper), Electroplating factory (Zinc), photographic rinse, petrochemical production plant and so on.

• Waste water adjust pH to 7.0~10.0 add eWTMT15 with stirring for 30 mins add organic flocculant with stirring sedimentations filter Treated water stir slowly for 15 mins.
• Reference dose for eW TMT 15 for 10PPM heavy metal ion

• High safety, non-toxic, no bad smell, no toxic material produced after treatment.
• Good removal effect, It can be used in wide pH range, can be used in acid or alkaline wastewater. When metal ions coexist, they can be removed at the same time. When the heavy metal ions are in the form of complex salt (EDTA, tetramine, etc), which cannot be removed completely by hydroxide precipitate method, this product can remove it as well. When it sediment the heavy metal, it will not be easily obstructed by coexisted salts in the waste water.
• Good flocculation effect. Solid-liquid separation easily.
• Simple processing method, easy sludge dewatering.

• It can be used to treat industrial wastewater and mining.
• It can be used for additive of the mud materials in oil-field, geological drilling and well boring.

• Easy to dissolve, dissolve time 40 min.
• High efficiency
• High molecular weight 10 million.
• High purity

• It should be diluted to the concentration of 0.1%. It is better to use neutral or desalted.
• When making up solution, the product should be scattered evenly in the stirring water.
• Usually the temperature is below 60 deg. Centi.
• The most economical dosage can be determined based on a preliminary test. Th pH value of the water should be adjusted before the treatment.

EWT 635 is a synergistic blend of polymer and poly glycol based defoamer specially designed for arresting foam in the evaporators. Effectiveness of the product is exhibited through instant defoaming capability by which process related problems are minimized and the efficiency of the process is improved.

• Oil second mining, the mining output product dehydration, oil filed sewage treatment, oil field containing polymer flooding sewage, oil refinery wastewater treatment, oily water in food processing, paper mill wastewater and the middle deinking wastewater treatment, urban underground sewage, etc.

• About the products and specifications, welcome to put forward suggestions and requests, use information, in order to perfect and improve the service to meet customer demand.
• There is no fixed pattern application technology. Customer should be based on its own technology and equipment condition, the implementation of application.

• Low from polysiloxane, modified polysiloxane, silicone resin, white carbon black, dispersing agent and stabilizer, etc.
• Low at low concentrations can maintain good elimination bubble.
• Suppression effect: Low foam suppression performance in prominent, Low easily dispersed in water,
• The compatability of low and foaming medium, Low to prevent the growth of microorganisms.

• Defoamer can be added after foam generated, as foam suppressions compoents according to the different system, usually adding defoaming agent fir 10 to 1000 ppm, the best adding quantity test according to particular case decided by the customer.
• Defoamer can be used directly, can also be used after dilution, in the foaming system can fully mixing dispersion. It can be added directly without dilution.
• For dilution, cant add water into it directly, It is easy to appear layer and demulsification, the affect the product quality, diluted with water directly or other incorrect consequences method, we company shall not bear the responsibility.

• Having long foam regeneration period.
• Faster suppression
• Non-pollution

Application Field
It is mainly used for waste water treatment for textile, printing, dying, paper-making, ink, butcher, landfill leachate and so on.
It can be used for colour removal treatment for high-coloristic waste water from dyestuff plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
It also can be used in the production process of paper & pulp as retention agent.

Advantage
Stronger decolorization (??95%) and removal of COD, BOD (50~70)
Faster Sedimentation, better flocculation
Non-pollution (no aluminium, chlorine, heavy metal ions etc.) 

Application Method
The product shall be diluted with 10-40 times water and then dosed into waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
The pH value of the waste water should be adjusted to 6-10 for better result.
When the colority and CODcr are relatively high, it can be used with the help of polyaluminium chloride, PFS, but not mixed together. In this way, the treatment cost can be lowered. Whether inorganic coagulant is used before or afterwards depends on the flocculation test and the treatment process.

Wastewater Treated
Dyeing waste water is active color and dispersing color, it is difficult to be treated by other treatment products.

• Water soluble Polymer Base

• These products are water soluble high polymers.
• It has good flocculation activity and can reduce the friction resistance between liquid.

• It can be use to treat industrial wastewater and sewage water.
• Easy to dissolved,Dissolve time 40Min.
• High efficiency and purity.

• This product is water soluble high polymer. It’s good soluble in most of organic solvents, with good flocculating activity. And can reduce the friction resistance between liquid.

• It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
• It can be used to treat industrial wastewater and life sewage water.
• It can be used for papermaking to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.

• Easy to dissolve, dissolve time 40 min.
• High efficiency
• High molecular weight 10 million.
• High purity

• It should be diluted to the concentration of 0.1%. It is better to use neutral or desalted.
• When making up solution, the product should be scattered evenly in the stirring water.
• Usually the temperature is between 50-60 deg.
• He most chemical dosage is based on trials.